This seamless Aluminum 6061 pipe, conforming to Schedule 40 specifications, offers superior strength and corrosion resistance. Its 3/8" nominal size and precise dimensions ensure reliable performance in demanding environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 3.8" |
| Outside Diameter | 5.803" |
| Wall Thickness | 0.245" |
Built to exacting engineering tolerances, this 3/8" Schedule 40 seamless pipe boasts an outside diameter of 5.803 inches and a wall thickness of 0.245 inches. Fabricated from Aluminum 6061, it exhibits excellent tensile strength (minimum 310 MPa) and yield strength (minimum 276 MPa), coupled with exceptional corrosion resistance. This makes it ideal for fluid transfer systems, structural components, and heat exchangers where lightweight and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate sealant or thread tape to the pipe threads. 3. Securely tighten the pipe to the fitting using a calibrated torque wrench to the manufacturer's recommended specification.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong sealant for aluminum alloys. | Always use sealants specifically rated for aluminum to prevent galvanic corrosion. |
| Over-tightening the pipe, leading to thread damage. | Utilize a torque wrench and adhere to the recommended torque values for the pipe size and fitting type. |
A: This Seamless Pipe, Schedule 40 is manufactured from Aluminum 6061.
A: Fluid and gas transfer systems, Lightweight structural framing, Heat exchanger components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||