Engineered for robust performance, this carbon steel deep groove ball bearing offers exceptional load-bearing capacity and smooth operation. Its compact dimensions make it ideal for space-constrained, high-demand power transmission systems.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 37mm |
| Outside Diameter | 47mm |
| Width | 8mm |
Purpose-built for heavy-duty applications, this deep groove ball bearing features a precise 37mm inside diameter and a 47mm outside diameter, with a minimal 8mm width. Constructed from high-quality carbon steel, it exhibits superior hardness and wear resistance, crucial for sustained operation under significant radial and axial loads. The optimized raceway geometry ensures minimal friction and heat generation, contributing to extended service life and operational efficiency in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and free of debris. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner ring only. 3. Secure the bearing in the housing, ensuring proper fit and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft installation. | Always apply installation force to the inner ring when mounting on the shaft to prevent bearing damage and brinelling. |
| Improper lubrication, leading to premature wear. | Apply the correct type and amount of lubricant as specified for the operating conditions before and during installation. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Industrial gearboxes, Electric motors, Conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||