Engineered for demanding applications, this 304 stainless steel deep groove ball bearing offers superior corrosion resistance and durability. Its precise dimensions ensure reliable performance in power transmission systems.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 37mm |
| Outside Diameter | 130mm |
| Width | 49mm |
Specified by design engineers worldwide, this deep groove ball bearing is constructed from premium 304 stainless steel, renowned for its excellent corrosion resistance, especially in humid or chemically aggressive environments. The internal geometry is optimized for high radial and axial load capacity, ensuring smooth, low-friction operation. With an inside diameter of 37mm, an outside diameter of 130mm, and a width of 49mm, it meets stringent dimensional tolerances for precise integration into machinery and equipment. This bearing is designed for extended service life under challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Gently press or tap the bearing onto the shaft or into the housing, applying force evenly to the outer or inner ring, respectively. 3. Verify smooth rotation and absence of binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the wrong ring during press-fit. | Always apply force to the ring that is being fitted (inner ring for shaft, outer ring for housing) to avoid damaging the raceways. |
| Using a hammer directly on the bearing during installation. | Use a proper bearing installation tool or a soft-faced hammer to distribute force evenly and prevent damage. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial pumps and compressors, Food processing machinery, Marine equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||