This 3.7-inch nominal size, Schedule 40 seamless brass pipe is engineered for robust fluid conveyance. Its high-quality brass construction ensures excellent durability and resistance to corrosive media in critical industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 3.7" |
| Outside Diameter | 4.619" |
| Wall Thickness | 0.466" |
A high-performance industrial component, this seamless brass pipe boasts a nominal pipe size of 3.7 inches, an outside diameter of 4.619 inches, and a substantial wall thickness of 0.466 inches. Manufactured from high-grade brass, it exhibits superior tensile strength and excellent machinability, making it ideal for applications requiring resistance to a wide range of corrosive fluids and high operating pressures. The seamless design eliminates weld imperfections, ensuring a leak-free, uniform flow path for critical media transfer in chemical processing, marine, and oil and gas industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or tape to the male threads. 3. Tighten fittings securely, avoiding over-tightening to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible thread sealant with brass fittings. | Utilize sealants specifically rated for brass and the intended fluid. |
| Over-tightening connections, leading to stress fractures in the brass. | Apply torque according to fitting manufacturer specifications, ensuring a snug but not excessive fit. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Chemical Processing, Marine Applications, Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||