Engineered for robust pneumatic applications, this 0.977" thick polycarbonate sheet offers superior impact resistance and clarity. Its dimensional stability ensures reliable performance in demanding environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.977" |
| Length | 36" |
| Width | 46" |
Built to exacting engineering tolerances, this 36" x 46" x 0.977" polycarbonate stock sheet provides exceptional mechanical strength and clarity essential for pneumatic system components. Polycarbonate's inherent high impact resistance (up to 20 times that of glass) makes it ideal for enclosures, sight glasses, and structural elements where protection against high-pressure air and potential debris is critical. Its broad operating temperature range and good chemical resistance to many common industrial fluids ensure longevity and performance in demanding factory automation and process control settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and fabrication process adheres to specified dimensions and edge finishing requirements. 2. Clean all surfaces thoroughly to remove any contaminants that could compromise seal integrity. 3. Install the fabricated polycarbonate component, ensuring proper support and fastening to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard acrylic instead of polycarbonate for high-pressure applications. | Always select polycarbonate for its significantly higher impact strength and shatter resistance required in pneumatic systems. |
| Improper edge finishing, leading to stress cracks. | Employ appropriate machining techniques and avoid localized heating during fabrication to maintain material integrity. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Pneumatic cylinder shields, Machine guarding for air-powered equipment, Sight glasses in pneumatic manifolds and reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||