This robust deep groove ball bearing, constructed from durable carbon steel, offers exceptional load-carrying capacity and smooth operation. Its precise dimensions ensure reliable performance in demanding power transmission systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 36mm |
| Outside Diameter | 91mm |
| Width | 47mm |
Manufactured under strict quality controls, this deep groove ball bearing boasts an inside diameter of 36mm, an outside diameter of 91mm, and a width of 47mm. Fabricated from high-grade carbon steel, it exhibits excellent hardness, wear resistance, and tensile strength, enabling it to withstand significant radial and axial loads. The raceway geometry is optimized for minimal friction and extended service life, making it ideal for continuous operation in environments requiring reliable power transmission.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bore are clean and free of burrs or contaminants. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring (inner ring on shaft, outer ring in housing). 3. Verify free rotation of the bearing after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing installation by hammering on the outer ring when mounting on a shaft. | Always apply pressure to the inner ring when mounting on a shaft and to the outer ring when mounting in a housing to avoid damaging the raceways. |
| Improper lubrication leading to premature wear. | Ensure the bearing is adequately lubricated with the correct type and amount of grease or oil as specified for the application before and during operation. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||