This industrial-grade Silicone O-Ring, constructed with a 304 Stainless Steel housing, provides exceptional sealing integrity in extreme environments. Its precise dimensions ensure reliable performance in critical applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 3.682" |
| Outside Diameter | 6.209" |
| Cross Section | 0.083" |
Specified by design engineers worldwide, this Silicone O-Ring boasts an Inside Diameter of 3.682 inches and an Outside Diameter of 6.209 inches, with a precise 0.083-inch cross-section. The robust 304 stainless steel construction offers superior corrosion resistance and mechanical strength, making it ideal for high-temperature, high-pressure, and chemically aggressive media. This material combination ensures long-term reliability and minimal degradation in harsh industrial settings, meeting stringent performance requirements across various sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free of debris. 2. Carefully place the O-ring into the designated groove, avoiding excessive stretching or twisting. 3. Apply light, even pressure to seat the O-ring completely within the groove before assembling mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing premature O-ring compression and failure. | Adhere to specified torque values for all fasteners to prevent over-compression. |
| Using incompatible cleaning agents that degrade the silicone material. | Consult the material compatibility chart and use only approved cleaning solutions. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Automotive fuel systems, Aerospace hydraulic systems, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||