This polycarbonate deep groove ball bearing offers exceptional lightweight performance and corrosion resistance. Engineered for precise operation, it's a superior choice for demanding power transmission systems.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 35mm |
| Outside Diameter | 74mm |
| Width | 14mm |
Manufactured under strict quality controls, this deep groove ball bearing features a 35mm inside diameter, 74mm outside diameter, and a 14mm width. Constructed from high-grade polycarbonate, it exhibits superior chemical resistance, low friction, and excellent electrical insulation properties, making it ideal for environments where traditional steel bearings may fail due to corrosion or contamination. Its lightweight nature also contributes to reduced inertia and improved energy efficiency in rotating assemblies. Suitable for moderate load applications requiring quiet operation and non-magnetic characteristics.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the shaft and the bearing housing thoroughly. 2. Gently press the bearing onto the shaft, ensuring it is seated squarely. 3. Secure the shaft and bearing assembly within the housing, applying even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or cracking of the polycarbonate. | Use a hydraulic press or a bearing installer tool for controlled, even pressure. Avoid hammering. |
| Contaminating the bearing surfaces with dirt or debris during handling. | Handle the bearing in a clean environment and keep it in its original packaging until ready for installation. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Lightweight Material Handling Systems, Corrosive Chemical Environments, Electrical Insulation Applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||