This 3.5-inch Schedule 80 seamless brass pipe offers superior corrosion resistance and strength. Its precise dimensions ensure reliable performance in demanding industrial and commercial fluid handling systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 3.5" |
| Outside Diameter | 5.265" |
| Wall Thickness | 0.328" |
Manufactured under strict quality controls, this 3.5-inch Schedule 80 seamless brass pipe boasts a precise outside diameter of 5.265 inches and a substantial wall thickness of 0.328 inches. The inherent properties of brass, including excellent corrosion resistance to a wide range of fluids and good thermal conductivity, make it suitable for applications involving water, oil, and certain chemical mediums. Its seamless construction eliminates potential leak paths associated with welded pipes, ensuring enhanced integrity for high-pressure and critical fluid transfer operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate pipe sealant or PTFE tape to the male threads of fittings. 3. Thread the pipe into the fitting, tightening to the manufacturer's recommended torque specification for Schedule 80 brass fittings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening threaded connections, which can crack brass fittings. | Use a torque wrench to adhere to specified torque values for brass fittings. |
| Using incompatible sealants or tapes that degrade brass. | Consult material compatibility charts and use sealants/tapes specifically rated for brass and the conveyed fluid. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Water distribution systems, Oil and gas transfer lines, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||