This 3.5-inch Brass Schedule 40 seamless pipe offers superior corrosion resistance and durability. Its precise dimensions ensure reliable performance in critical fluid handling and structural applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 3.5" |
| Outside Diameter | 1.989" |
| Wall Thickness | 0.204" |
Built to exacting engineering tolerances, this 3.5-inch Schedule 40 seamless brass pipe features an outside diameter of 1.989 inches and a wall thickness of 0.204 inches. Manufactured from high-grade brass, it exhibits excellent ductility, machinability, and natural resistance to a wide range of corrosive media, making it suitable for potable water systems, HVAC, instrumentation, and general fluid conveyance where hygiene and longevity are paramount. The seamless construction eliminates weld seams, ensuring uniform strength and leak-proof integrity under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate flux and solder or use compatible compression fittings. 3. Securely join pipe sections, ensuring a tight seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible joining methods for brass pipe. | Always use methods specifically rated for brass, such as soldering with lead-free solder or using brass-compatible compression fittings. |
| Exposing brass to highly acidic or alkaline environments. | Verify the chemical compatibility of brass with the intended fluid to prevent premature corrosion. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Potable Water Distribution, Instrumentation Tubing, HVAC Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||