This robust carbon steel deep groove ball bearing, with precise dimensions of 34mm ID, 44mm OD, and 21mm width, is engineered for demanding power transmission applications, offering exceptional load-bearing capacity and minimal friction.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 34mm |
| Outside Diameter | 44mm |
| Width | 21mm |
Engineered for reliability and performance, this deep groove ball bearing features a carbon steel construction, providing excellent hardness, wear resistance, and tensile strength for sustained operation under moderate radial and axial loads. The internal diameter measures 34mm, the external diameter is 44mm, and the width is 21mm, ensuring a precise fit within compatible housings and shafts. Its design facilitates high-speed rotation and low torque resistance, making it suitable for a wide range of power transmission systems where efficiency and durability are paramount. The material's inherent properties contribute to its long service life and ability to withstand challenging operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing bore and shaft diameter are clean and free of debris. Verify shaft and housing dimensions match bearing specifications. 2. Carefully press the bearing onto the shaft or into the housing using a controlled force, ensuring it seats squarely and without excessive hammering. 3. Lubricate the bearing according to the manufacturer's recommendations before final assembly and operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force or impact during mounting, leading to brinelling or deformation of raceways. | Utilize a proper bearing press or induction heater for controlled mounting. Avoid direct hammering on the bearing's outer ring or cage. |
| Incorrect or insufficient lubrication, resulting in premature wear and heat buildup. | Consult the bearing manufacturer's lubrication guidelines for the specific application and operating conditions. Ensure a consistent supply of appropriate lubricant. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Conveyor Systems, Gearboxes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||