This 3.4" Schedule 160 seamless polycarbonate pipe offers exceptional clarity, impact strength, and chemical resistance. Engineered for critical fluid and gas handling in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 3.4" |
| Outside Diameter | 3.206" |
| Wall Thickness | 0.180" |
Precision-manufactured to tight tolerances, this 3.4" nominal size seamless polycarbonate pipe boasts an actual outside diameter of 3.206" and a substantial 0.180" wall thickness, conforming to Schedule 160. Polycarbonate offers superior impact strength, excellent optical clarity, and good chemical resistance to many acids, bases, and hydrocarbons, making it suitable for high-pressure applications and environments where visual inspection is crucial. Its operating temperature range and UV resistance further enhance its versatility in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate solvent cement specifically designed for polycarbonate. 3. Insert pipe into fitting with a slight twisting motion, holding for 30 seconds to set.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using general-purpose PVC/CPVC solvent cement | Always use solvent cement specifically formulated for polycarbonate to ensure proper bonding and prevent material degradation. |
| Over-tightening threaded connections | Polycarbonate can be brittle under excessive torque. Hand-tighten and then use a wrench for a quarter to half turn, depending on fitting type. |
A: This Seamless Pipe, Schedule 160 is manufactured from Polycarbonate.
A: High-pressure fluid transfer systems, Laboratory and medical equipment, Sight glasses and visual monitoring.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||