This industrial-grade Polycarbonate stock sheet is engineered for superior performance in demanding electrical and lighting environments. Its exceptional impact resistance and dielectric properties offer robust protection for sensitive components.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.769" |
| Length | 39" |
| Width | 33" |
Purpose-built for heavy-duty applications, this Polycarbonate sheet offers an optimal blend of strength, clarity, and electrical insulation. Measuring 0.769 inches (approx. 19.5mm) thick, with a generous 39-inch length and 33-inch width, it provides substantial coverage for various electrical enclosures, machine guarding, and lighting fixtures. Polycarbonate's inherent high impact strength significantly surpasses that of traditional materials like acrylic, making it ideal for environments where accidental damage or vandalism is a concern. Its excellent dielectric strength ensures reliable insulation, preventing electrical discharge and ensuring operational safety. The material's wide operating temperature range further enhances its suitability for diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Carefully position the Polycarbonate sheet, aligning it with pre-drilled mounting holes or desired placement. 3. Secure the sheet using appropriate fasteners (e.g., screws with washers) at regular intervals, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners during installation. | Use washers and tighten fasteners only until snug, allowing for slight thermal expansion without inducing stress. |
| Using abrasive cleaning agents. | Clean the Polycarbonate surface with a mild soap and water solution, followed by a rinse with clean water and drying with a soft, lint-free cloth. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Electrical Enclosure Covers, Machine Guarding for Electrical Equipment, Protective Shields for Lighting Fixtures, Industrial Control Panel Windows.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||