This 3.4" Schedule 40 seamless nylon pipe offers superior chemical resistance and durability. Its robust construction ensures reliable fluid and gas transfer in demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 3.4" |
| Outside Diameter | 4.315" |
| Wall Thickness | 0.164" |
Engineered for reliability and performance, this 3.4" Schedule 40 seamless pipe boasts an outside diameter of 4.315" and a wall thickness of 0.164". Manufactured from high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and a broad operating temperature range, making it suitable for high-pressure hydraulic lines, pneumatic systems, and chemical transfer applications. Its seamless construction eliminates potential leak points and ensures consistent flow characteristics.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free from debris. 2. Apply appropriate solvent cement to both the pipe end and the fitting socket. 3. Insert the pipe into the fitting with a slight twisting motion until it bottoms out. 4. Hold firmly for 30 seconds to prevent movement while the cement sets.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of solvent cement for nylon. | Always use a solvent cement specifically formulated for nylon to ensure proper bonding and prevent material degradation. |
| Insufficient curing time before pressurizing the system. | Allow adequate cure time as per the solvent cement manufacturer's specifications before introducing pressure to the system to guarantee a secure joint. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Hydraulic systems, Pneumatic lines, Chemical transfer, Low-pressure fluid conveyance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||