This 3.4" Schedule 40 seamless brass pipe offers superior corrosion resistance and durability. Its robust construction ensures reliable fluid transport and structural integrity in demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 3.4" |
| Outside Diameter | 1.110" |
| Wall Thickness | 0.274" |
Engineered for reliability and performance, this 3.4" seamless brass pipe conforms to Schedule 40 dimensions, featuring an outside diameter of 1.110" and a substantial wall thickness of 0.274". Brass, known for its excellent corrosion resistance to a wide range of fluids and its inherent antimicrobial properties, makes this pipe ideal for potable water systems, fuel lines, and general fluid conveyance where purity and longevity are paramount. The seamless construction eliminates weld defects, providing a smooth internal surface that minimizes flow restriction and turbulence, crucial for efficient operation in hydraulic and pneumatic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate pipe sealant or PTFE tape to the male threads of fittings. 3. Hand-tighten the fitting onto the pipe, then use a wrench to tighten an additional 1-1.5 turns, depending on the fitting type.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening threaded connections, potentially cracking the brass fitting or deforming the pipe threads. | Hand-tighten fittings until snug, then use a wrench for a limited additional turn (typically 1-1.5 revolutions). Consult fitting manufacturer guidelines for precise torque specifications if available. |
| Using incompatible sealants or tapes that can degrade brass or contaminate the fluid being conveyed. | Always use pipe sealants and tapes specifically rated for use with brass and the intended fluid medium. Avoid aggressive chemical sealants. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Potable Water Distribution, Fuel and Oil Lines, Hydraulic and Pneumatic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||