Engineered for reliability, this 304 stainless steel deep groove ball bearing offers superior corrosion resistance and durability. Its precise dimensions ensure optimal performance in demanding power transmission systems, providing smooth, low-friction operation under various loads.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 33mm |
| Outside Diameter | 154mm |
| Width | 17mm |
A proven choice for industrial professionals, this deep groove ball bearing is constructed from premium 304 stainless steel, offering exceptional resistance to corrosion and environmental degradation. With an inside diameter of 33mm, an outside diameter of 154mm, and a width of 17mm, it provides robust support and low friction for rotational applications. The inherent properties of 304 stainless steel make it suitable for environments where moisture, mild chemicals, or hygiene are critical concerns, ensuring extended service life and consistent operational efficiency in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft, maintaining axial alignment. 3. Secure the shaft and housing, ensuring proper preload is achieved according to equipment specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft with impact. | Use a proper bearing installation tool or press, applying force evenly to the inner ring. |
| Installing the bearing in a dirty environment. | Clean the bearing and surrounding components thoroughly before installation to prevent contamination. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Conveyor Systems, Electric Motors, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||