This high-quality carbon steel deep groove ball bearing offers exceptional load-bearing capacity and smooth rotational performance. Designed for precision and durability in various power transmission systems.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 32mm |
| Outside Diameter | 100mm |
| Width | 47mm |
Specified by design engineers worldwide, this deep groove ball bearing boasts a precise 32mm inside diameter, a robust 100mm outside diameter, and a substantial 47mm width. Constructed from high-carbon steel, it exhibits excellent hardness, wear resistance, and compressive strength, ensuring reliable operation under significant radial and axial loads. Its hardened raceways and precision-ground balls minimize friction and heat generation, contributing to extended service life and optimal efficiency in high-speed, heavy-duty applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing surfaces are clean and free of contaminants. 2. Apply a light film of appropriate lubricant to the shaft and inner ring. 3. Carefully press the bearing onto the shaft using a suitable bearing press or arbor, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper lubrication or lack thereof. | Always use the specified lubricant and ensure consistent replenishment according to the operating conditions. |
| Applying excessive force during installation, leading to brinelling or damage. | Utilize a bearing press or induction heater for controlled mounting, applying force only to the ring being fitted. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||