This high-performance deep groove ball bearing, constructed from robust carbon steel, is engineered for precision and longevity in power transmission systems. Its dimensional accuracy ensures smooth rotational performance under load.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 31mm |
| Outside Diameter | 96mm |
| Width | 7mm |
Specified by design engineers worldwide, this 31mm inside diameter, 96mm outside diameter, and 7mm width deep groove ball bearing is manufactured from high-grade carbon steel, offering excellent hardness, wear resistance, and load-carrying capacity. The material's inherent properties make it ideal for applications requiring consistent performance and durability, such as electric motors, pumps, and conveyor systems where axial and radial loads are present. Its balanced design minimizes friction and heat generation, contributing to extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even force. 3. Verify proper seating and rotational freedom before engaging load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring when mounting on the shaft. | Always apply mounting force to the ring that is being pressed into its mating component (inner ring for shaft mounting, outer ring for housing mounting). |
| Improper lubrication leading to premature wear. | Apply the correct type and amount of lubricant as specified for the application and operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Pumps, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||