This robust deep groove ball bearing, constructed from high-grade carbon steel, offers exceptional load-carrying capacity and durability for critical power transmission systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 31mm |
| Outside Diameter | 108mm |
| Width | 37mm |
Trusted by engineers across multiple sectors, this deep groove ball bearing features a precise 31mm inside diameter, a substantial 108mm outside diameter, and a 37mm width. Manufactured from durable carbon steel, it exhibits excellent hardness and wear resistance, ensuring longevity under heavy radial and axial loads. Its robust design minimizes friction and heat generation, making it ideal for continuous operation in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing and housing surfaces are clean and free of debris. 2. Carefully align the bearing with the shaft and housing before insertion. 3. Apply even force during mounting to prevent damage to the raceways.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper alignment during installation, leading to premature wear. | Utilize alignment tools and ensure a precise fit between the bearing, shaft, and housing. |
| Over-tightening or excessive impact during mounting, causing brinelling. | Use a proper bearing mounting press or induction heater, and apply force only to the ring being fitted. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||