This high-performance deep groove ball bearing, crafted from lightweight and corrosion-resistant Aluminum 6061, ensures smooth, low-friction operation. Its precise dimensions offer superior load distribution and extended service life in demanding power transmission systems.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 31mm |
| Outside Diameter | 82mm |
| Width | 12mm |
Engineered for reliability and performance, this deep groove ball bearing features an inside diameter of 31mm, an outside diameter of 82mm, and a width of 12mm. Constructed from Aluminum 6061, it offers an exceptional strength-to-weight ratio and superior corrosion resistance compared to traditional steel bearings, making it ideal for environments where weight or oxidation is a concern. This design facilitates efficient axial and radial load handling, minimizing friction and wear in dynamic power transmission assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft until it is fully seated against the shoulder. 3. Install the housing and secure it, ensuring no excessive force is applied directly to the bearing races.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force directly to the outer race during shaft mounting. | Always apply force to the inner race when mounting onto the shaft to avoid damaging the bearing. |
| Over-tightening housing fasteners, leading to premature bearing failure. | Torque housing fasteners to the manufacturer's recommended specifications to prevent excessive preload or distortion. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric motors and generators, Conveyor systems, Industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||