This robust 316 stainless steel U-bolt is engineered for securing 1" nominal pipe. Featuring superior corrosion resistance, it ensures long-term structural integrity in demanding environments.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 4.94" |
| Inside Length ( B) | 3.79" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this U-bolt is manufactured from premium 316 stainless steel, renowned for its exceptional resistance to pitting and crevice corrosion, particularly in chloride-rich environments. With an inside width (A) of 4.94 inches and an inside length (B) of 3.79 inches, it precisely accommodates 1" nominal pipe. The robust 1/2"-13 UNC threading on both legs provides secure fastening capabilities. This material grade is ideal for marine applications, chemical processing plants, and pharmaceutical facilities where purity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 1" nominal pipe, ensuring the pipe is centrally located within the U-bolt's curvature. 2. Slide the included washers onto the threaded legs of the U-bolt. 3. Thread the nuts onto the U-bolt legs, tightening them evenly to secure the pipe against the mounting surface. Ensure consistent tension on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a U-bolt with insufficient inside width for the pipe diameter. | Always verify the 'Inside Width (A)' spec matches or slightly exceeds the outer diameter of the pipe being secured. |
| Over-tightening nuts, leading to deformation of the pipe or U-bolt. | Tighten nuts to a snug fit and then an additional 1/4 to 1/2 turn, or consult torque specifications if available, to avoid over-stressing components. |
A: This 316 Stainless Steel U-Bolt, 1" Pipe is manufactured from 316 Stainless Steel.
A: Marine hardware and structural support, Chemical processing pipe and conduit anchoring, Pharmaceutical industry equipment mounting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||