This 0.924" thick 316 stainless steel stock sheet provides exceptional corrosion resistance and mechanical strength, crucial for high-performance pneumatic systems operating in harsh environments.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.924" |
| Length | 44" |
| Width | 14" |
Precision-manufactured to tight tolerances, this 0.924" thick 316 stainless steel stock sheet offers superior durability and resistance to a wide range of corrosive media, including chlorides and acids. Its robust composition ensures longevity in demanding pneumatic applications such as high-pressure valve bodies, cylinder components, and filtration housings. The 44" length and 14" width provide ample material for fabrication of complex assemblies requiring precise dimensional integrity and reliable performance under extreme operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Prepare cutting and machining equipment to accommodate material thickness and hardness. 3. Fabricate components according to design specifications, ensuring proper deburring and surface finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive pneumatic environments. | Always specify 316 stainless steel for applications exposed to moisture, chemicals, or salt-laden air to prevent premature corrosion and failure. |
| Inadequate edge preparation after cutting. | Thoroughly deburr and smooth all cut edges to prevent damage to seals and O-rings within pneumatic components. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: High-pressure pneumatic valve bodies, Pneumatic cylinder components, Corrosion-resistant pneumatic filters and housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||