This 316 stainless steel stock sheet provides superior corrosion resistance and durability for critical lubricating system components. Precisely manufactured to ensure optimal performance in harsh environments.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.136" |
| Length | 34" |
| Width | 28" |
Built to exacting engineering tolerances, this 0.136-inch thick stock sheet offers exceptional dimensional stability across its 34-inch length and 28-inch width. Composed of 316 stainless steel, it boasts enhanced resistance to pitting and crevice corrosion due to its molybdenum content, making it ideal for marine, chemical processing, and high-temperature lubricating applications where standard stainless steels may fail. Its low carbon content minimizes carbide precipitation during welding, preserving its integrity. This material is well-suited for fabricating custom wear plates, bearing housings, and containment systems within lubricating machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended installation area thoroughly to remove any debris or contaminants. 2. Carefully position the stock sheet according to design specifications, ensuring proper alignment. 3. Secure the sheet using appropriate fastening methods such as welding, bolting, or adhesive bonding, considering the operational loads and environmental conditions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade of stainless steel that is not resistant to the specific corrosive elements in the lubricating fluid. | Always specify 316 stainless steel for applications involving chlorides, acids, or saltwater to ensure longevity and prevent premature failure. |
| Insufficient edge preparation or cleaning before welding, leading to compromised weld integrity. | Ensure all edges are properly beveled, cleaned, and free of any surface contaminants prior to welding 316 stainless steel to achieve full penetration and strength. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom wear components for pumps and compressors, Bearing retainers and seals in corrosive environments, Chute liners and guide rails in material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||