This 316 stainless steel stock sheet is engineered for critical lubricating system components. Its superior corrosion resistance and robust mechanical properties ensure reliable performance in aggressive environments.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.326" |
| Length | 17" |
| Width | 45" |
Precision-manufactured to tight tolerances, this 316 stainless steel stock sheet measures 0.326 inches in thickness, 17 inches in width, and 45 inches in length. Composed of austenitic stainless steel with molybdenum and nickel, it exhibits exceptional resistance to pitting and crevice corrosion, making it ideal for marine and chemical processing applications. The material's inherent lubricity and wear resistance are critical for components in high-pressure lubrication systems and sliding mechanisms.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants. 2. Accurately cut to the required dimensions using appropriate cutting tools. 3. Smooth all edges to prevent material fatigue and facilitate smooth operation in its intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools leading to burrs and uneven edges. | Employ high-quality, sharp cutting tools designed for stainless steel and ensure deburring is performed meticulously. |
| Neglecting surface preparation before installation. | Thoroughly clean the sheet surface to remove any grease, oils, or particulate matter that could impede performance or cause premature wear. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Wear plates in high-pressure lubrication systems, Guide rails for automated lubrication dispensing, Components within marine lubrication systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||