Engineered for extreme environments, this 0.812" thick 316 stainless steel stock sheet offers superior corrosion resistance and mechanical strength for critical pneumatic components.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.812" |
| Length | 32" |
| Width | 42" |
Purpose-built for heavy-duty applications, this 316 stainless steel stock sheet measures 0.812 inches in thickness, 32 inches in width, and 42 inches in length. The inherent properties of 316 stainless steel, including its high chromium and molybdenum content, provide exceptional resistance to pitting, crevice corrosion, and general corrosion, even in aggressive chemical and saline environments commonly found in industrial pneumatic systems. This makes it ideal for fabricating robust housings, pressure vessels, and structural components that demand longevity and reliability under significant stress and exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Prepare surfaces for machining or fabrication, ensuring cleanliness and removal of any protective coatings. 3. Fabricate components according to engineered drawings, adhering to appropriate machining parameters for 316 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive pneumatic environments. | Always select 316 stainless steel or equivalent for applications exposed to chemicals, moisture, or salt spray to prevent premature corrosion and failure. |
| Incorrectly specifying sheet thickness for pressure-rated components. | Consult relevant ASME or industry standards and perform engineering calculations to ensure the chosen sheet thickness is adequate for the intended operating pressure and safety factors. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Pneumatic control panels in marine environments, High-pressure air receivers for chemical processing, Corrosion-resistant enclosures for offshore pneumatic equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||