This 0.242" thick 316 stainless steel stock sheet provides exceptional corrosion resistance and structural integrity. Ideal for robust suspending and bracing solutions in harsh environments.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.242" |
| Length | 25" |
| Width | 34" |
Specified by design engineers worldwide, this 316 stainless steel stock sheet offers a superior combination of strength, formability, and unparalleled resistance to corrosive environments, including chlorides. Its precise dimensions of 0.242" thickness, 25" length, and 34" width make it ideal for custom fabrication in demanding marine, chemical processing, and food service applications where hygiene and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the sheet for cutting based on design specifications. 2. Utilize appropriate cutting tools (e.g., abrasive cut-off wheel, plasma cutter) with proper safety precautions. 3. Fabricate and install the cut components using approved fastening methods (welding, bolting) suitable for 316 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which will corrode and compromise the integrity of the 316 stainless steel assembly. | Always use 316 stainless steel fasteners to maintain the corrosion resistance of the entire system. |
| Inadequate edge preparation after cutting, leading to stress risers and potential failure points. | Smooth and deburr all cut edges thoroughly to ensure a uniform stress distribution. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom structural bracing in corrosive industrial settings, Marine hardware and support structures, Food processing equipment frames and supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||