This robust 316 stainless steel stock sheet provides exceptional durability and corrosion resistance, ideal for fabricating custom suspending and bracing components in harsh industrial environments.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.786" |
| Length | 32" |
| Width | 26" |
A proven choice for industrial professionals, this 316 stainless steel stock sheet boasts a substantial thickness of 0.786 inches, with dimensions of 32 inches in length and 26 inches in width. The inherent properties of 316 stainless steel, including its elevated molybdenum content, provide superior resistance to pitting and crevice corrosion, making it suitable for marine, chemical processing, and food service applications where aggressive media is present. This material's high tensile strength and formability allow for the precise fabrication of custom structural supports and bracing systems designed to withstand significant loads and environmental challenges.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify that the sheet is clean and free from any contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate cutting tools for stainless steel. 3. Fabricate and install the component according to engineering drawings and applicable safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Always specify 316 stainless steel for applications exposed to saltwater, chemicals, or high humidity to prevent premature corrosion and structural failure. |
| Incorrectly interpreting sheet thickness for load-bearing calculations. | Consult engineering specifications and load charts to ensure the 0.786" thickness is adequate for the intended suspending or bracing application. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom Bracing Systems, Industrial Support Structures, Marine Hardware Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||