This premium 316 stainless steel stock sheet offers exceptional corrosion resistance and mechanical strength. Precisely manufactured to exacting standards, it's engineered for high-performance pneumatic systems operating in aggressive environments.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.806" |
| Length | 43" |
| Width | 48" |
Manufactured under strict quality controls, this 0.806-inch thick stock sheet is constructed from robust 316 stainless steel, renowned for its superior resistance to pitting and crevice corrosion, particularly in chloride-rich environments. Its dimensions of 43 inches in length and 48 inches in width provide ample material for fabrication. The inherent non-magnetic properties and excellent weldability of 316 stainless steel make it an ideal choice for components in pneumatic systems exposed to corrosive gases, high humidity, or marine conditions, ensuring long-term operational integrity and minimal maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free of contaminants. 2. Precisely cut to required dimensions using appropriate fabrication methods (e.g., laser cutting, waterjet). 3. Deburr all cut edges to prevent material stress concentration and ensure smooth operation within pneumatic assemblies.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to edge hardening or contamination. | Employ carbide-tipped or diamond-grit cutting tools and maintain strict cleanliness to prevent cross-contamination. |
| Insufficient attention to edge finishing, resulting in potential leakage points or premature wear in pneumatic seals. | Thoroughly deburr and polish all cut edges to meet the required surface finish specifications for pneumatic sealing applications. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Pneumatic cylinder construction, Valve bodies and actuators in corrosive atmospheres, Piping and manifold components for specialty gases.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||