This 316 stainless steel stock sheet provides exceptional corrosion resistance and mechanical strength, ideal for fabricating custom components in aggressive pneumatic environments.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.381" |
| Length | 14" |
| Width | 26" |
Trusted by engineers across multiple sectors, this 0.381-inch thick, 14-inch wide by 26-inch long stock sheet is manufactured from high-quality 316 stainless steel. Renowned for its superior resistance to pitting and crevice corrosion, especially in chloride-rich environments, it ensures longevity in demanding pneumatic systems. Its excellent formability and weldability allow for precise fabrication of critical components, maintaining system integrity under pressure and exposure to harsh chemicals or atmospheric conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut or machine to the required dimensions for the component. 3. Fabricate and integrate into the pneumatic system following established engineering best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Always specify 316 stainless steel for applications exposed to chemicals, saltwater, or high humidity to prevent premature failure due to corrosion. |
| Inadequate consideration of dimensional tolerances during fabrication. | Maintain tight dimensional control during cutting and forming to ensure proper fit and sealing within pneumatic assemblies, preventing leaks. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom pneumatic cylinder components, Corrosion-resistant valve bodies, High-pressure pneumatic manifold fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||