This robust 316 stainless steel stock sheet is engineered for critical pneumatic systems. Its superior corrosion resistance and mechanical strength ensure reliable performance in harsh environments.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.894" |
| Length | 26" |
| Width | 34" |
Built to exacting engineering tolerances, this 316 stainless steel stock sheet measures 0.894 inches thick, 26 inches in length, and 34 inches in width. Composed of Austenitic 316 stainless steel, it offers exceptional resistance to pitting and crevice corrosion in chloride-rich environments, making it ideal for corrosive gas handling, high-pressure pneumatic actuators, and systems exposed to marine or chemical atmospheres. Its inherent strength and durability prevent deformation under sustained pressure and impact.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material grade against project specifications. 2. Clean sheet surface thoroughly to remove any debris or contaminants. 3. Precisely cut or machine the sheet according to the required component design, ensuring clean edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel in corrosive environments. | Always specify 316 stainless steel for applications involving chlorides or aggressive chemicals to prevent premature corrosion and failure. |
| Inadequate edge preparation after cutting. | Deburr and smooth all cut edges to prevent stress risers and potential points of failure in high-pressure pneumatic systems. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: High-pressure pneumatic manifold construction, Corrosion-resistant pneumatic enclosures, Custom pneumatic cylinder components in aggressive media.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||