This robust 316 stainless steel stock sheet provides exceptional strength and resistance to harsh environments. Engineered for critical industrial safety applications, it offers long-term performance and reliability.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.788" |
| Length | 36" |
| Width | 23" |
Purpose-built for heavy-duty applications, this 0.788-inch thick stock sheet measures 36 inches in length and 23 inches in width. Crafted from premium 316 stainless steel, it exhibits superior tensile strength, excellent formability, and unparalleled resistance to crevice corrosion and pitting in chloride-rich environments. This makes it the material of choice for platforms, barriers, structural components, and protective shielding in chemical processing, marine, food and beverage, and offshore industries where safety and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material integrity and dimensions against project requirements. 2. Clean the installation area and the stock sheet thoroughly to remove any contaminants. 3. Secure the sheet using appropriate fasteners or welding techniques, ensuring structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel for corrosive environments. | Always specify 316 stainless steel for applications exposed to saltwater, chemicals, or high humidity to prevent premature corrosion and failure. |
| Inadequate structural support for the sheet's weight and load-bearing requirements. | Calculate and implement sufficient structural support to prevent sagging, buckling, or catastrophic failure under operational loads. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Industrial Safety Barriers and Guardrails, Marine and Offshore Platforms, Chemical Processing Equipment Components, Food and Beverage Processing Surfaces, Corrosion-Resistant Structural Reinforcements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||