This robust 316 stainless steel stock sheet provides a stable and precise surface for critical measuring and inspecting tasks. Engineered for exceptional durability and corrosion resistance in demanding environments.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.835" |
| Length | 27" |
| Width | 14" |
Engineered for reliability and performance, this 316 stainless steel stock sheet offers superior dimensional stability and an exceptionally smooth, non-reactive surface. With a precise thickness of 0.835 inches, a generous length of 27 inches, and a width of 14 inches, it is ideal for creating custom inspection fixtures, precision jigs, or as a foundational element in metrology setups. The inherent corrosion resistance of 316 stainless steel, due to its molybdenum content, ensures longevity and accuracy even when exposed to harsh chemicals or marine environments. Its high tensile strength and hardness make it resistant to deformation under load, a critical factor in maintaining measurement integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended mounting surface thoroughly to remove all debris and contaminants. 2. Carefully position the 316 stainless steel stock sheet, ensuring proper alignment with any existing datum points or mounting holes. 3. Secure the sheet using appropriate fasteners (e.g., socket head cap screws with washers) at designated locations, applying consistent torque to avoid distortion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of mounting surface leading to uneven contact and potential distortion. | Ensure the mounting surface is meticulously cleaned and dried before installation. Use a degreaser if necessary. |
| Over-tightening fasteners, which can induce stress and warp the sheet, compromising flatness. | Tighten fasteners incrementally in a cross-pattern to distribute stress evenly. Consult fastener torque specifications for the sheet thickness. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Precision calibration surfaces, Custom jig and fixture bases, Metrology and inspection workstations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||