This 0.779" thick 316 stainless steel stock sheet offers exceptional strength and corrosion resistance for demanding suspending and bracing applications. Engineered for durability and longevity in harsh environments.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.779" |
| Length | 21" |
| Width | 35" |
Precision-manufactured to tight tolerances, this 0.779" thick stock sheet measures 21" in width and 35" in length. Fabricated from 316 stainless steel, it exhibits superior resistance to pitting and crevice corrosion due to its molybdenum content, making it ideal for marine, chemical processing, and high-humidity environments. The substantial thickness ensures significant load-bearing capacity for critical structural support and bracing systems. Its inherent non-magnetic properties and excellent weldability further enhance its suitability for complex fabrication and installation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Carefully position the sheet at the designated location for suspension or bracing. 3. Securely fasten the sheet using appropriate hardware and mounting techniques as per engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inadequate fasteners for the sheet's thickness and intended load. | Always select fasteners (bolts, screws, rivets) rated for the shear and tensile loads expected and ensure they are compatible with 316 stainless steel to prevent galvanic corrosion. |
| Improper edge preparation leading to stress risers or reduced structural integrity. | Ensure all cut edges are deburred and, if necessary, chamfered according to design requirements to prevent stress concentration points. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Heavy-duty structural bracing in corrosive environments, Support structures for industrial equipment, Marine hardware and offshore platforms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||