This 0.749" thick 316 stainless steel stock sheet offers exceptional corrosion and chemical resistance, making it ideal for severe lubrication system components and environments.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.749" |
| Length | 35" |
| Width | 33" |
Purpose-built for heavy-duty applications, this 316 stainless steel stock sheet exhibits superior performance in corrosive and high-temperature environments. Its 0.749" thickness provides substantial structural integrity, while the 35" length and 33" width offer ample material for fabrication of critical components within advanced lubricating systems. The inherent passivation layer of 316 stainless steel, rich in molybdenum, ensures excellent resistance to pitting and crevice corrosion, vital for prolonged contact with aggressive lubricants and chemicals. This material is engineered for applications demanding reliability and longevity under extreme operational stresses.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any contaminants. 2. Ensure all tooling is appropriate for machining and forming 0.749" thick 316 stainless steel. 3. Fabricate components according to design specifications, paying close attention to tolerances and edge finishing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which can lead to galvanic corrosion. | Always use compatible stainless steel fasteners (e.g., 316 grade) to prevent galvanic corrosion. |
| Insufficient material support during machining, leading to deformation. | Employ appropriate workholding and fixturing techniques to maintain structural integrity during fabrication. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Bearings and bushings in corrosive environments, Pump components for chemical processing, Seals and gaskets for high-pressure lubrication systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||