This 316 stainless steel stock sheet offers superior corrosion resistance and mechanical strength. Precisely manufactured to exacting standards, it's an essential raw material for demanding industrial environments.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.643" |
| Length | 38" |
| Width | 42" |
Built to exacting engineering tolerances, this 316 stainless steel stock sheet measures 0.643 inches (16.33 mm) in thickness, 38 inches (965.2 mm) in length, and 42 inches (1066.8 mm) in width. Composed of a chromium-nickel-molybdenum alloy, it exhibits exceptional resistance to pitting and crevice corrosion in chloride-rich environments, as well as good formability and weldability. Its inherent durability makes it suitable for marine, chemical processing, food and beverage, and pharmaceutical industries where extreme environmental conditions and stringent hygiene standards are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface imperfections or dimensional deviations. 2. Ensure cutting and fabrication tools are appropriate for 316 stainless steel to maintain material integrity. 3. Implement proper handling procedures to prevent scratches or contamination during fabrication and assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can embed iron particles, leading to rust. | Utilize dedicated stainless steel cutting blades and ensure tools are clean and free from carbon steel residue. |
| Inadequate cleaning post-fabrication, leaving behind residues that can compromise corrosion resistance. | Thoroughly clean the fabricated components using non-abrasive methods and appropriate cleaning agents to remove all contaminants and passivation layers. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Chemical Processing Equipment, Marine Hardware and Structures, Food and Beverage Processing Components, Pharmaceutical Manufacturing Equipment, Heat Exchangers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||