This 316 stainless steel stock sheet offers exceptional strength and corrosion resistance, making it ideal for robust material handling solutions in challenging industrial settings.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.576" |
| Length | 41" |
| Width | 20" |
Designed for demanding industrial environments, this 0.576-inch thick stock sheet is fabricated from high-grade 316 stainless steel, renowned for its superior resistance to pitting and crevice corrosion, especially in saline or chemically aggressive atmospheres. Its dimensions of 41 inches in length and 20 inches in width provide ample material for fabricating custom chutes, hoppers, guarding, and structural components within material handling systems. The inherent durability and non-reactive nature of 316 stainless steel ensure longevity and minimal maintenance under continuous operational stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and integrity before cutting. 2. Utilize appropriate cutting tools rated for thick stainless steel. 3. Ensure all edges are deburred and cleaned prior to further fabrication or installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to contamination and reduced corrosion resistance. | Employ dedicated stainless steel cutting tools and maintain strict cleanliness to prevent cross-contamination. |
| Insufficient edge preparation after cutting, leading to stress risers or potential failure points. | Thoroughly deburr all cut edges and inspect for any surface imperfections. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom Chute and Hopper Fabrication, Protective Guarding for Conveyor Systems, Structural Components in Corrosive Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||