This robust 316 stainless steel stock sheet offers superior corrosion resistance and dimensional stability for critical measuring and inspecting tasks in harsh environments.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.518" |
| Length | 25" |
| Width | 46" |
A high-performance industrial component, this 316 stainless steel stock sheet measures 0.518 inches thick, 25 inches in length, and 46 inches in width. Fabricated from marine-grade 316 stainless steel, it boasts exceptional resistance to pitting and crevice corrosion in chloride-rich environments, as well as good strength and formability. Its precise dimensions and inherent material properties make it ideal for creating custom jigs, fixtures, templates, and precision measuring surfaces where accuracy and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and free from debris. 2. Position the 316 stainless steel stock sheet carefully onto the designated area. 3. Secure the sheet using appropriate fasteners (e.g., countersunk screws, rivets) at a minimum of four equidistant points along the perimeter and at center support if needed.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which can lead to galvanic corrosion. | Always use fasteners made of 316 stainless steel or an equivalent corrosion-resistant material. |
| Improper handling leading to surface scratches or deformation. | Handle the sheet with care, using non-marring tools and protective gloves. Avoid dropping or dragging the sheet. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom precision calibration plates, Jigs and fixtures for quality control, Substrates for specialized measurement tools.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||