This 316 stainless steel stock sheet is engineered for demanding lubricating applications. Its superior corrosion resistance and smooth surface finish ensure optimal performance and longevity in harsh environments.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.330" |
| Length | 18" |
| Width | 42" |
Manufactured under strict quality controls, this 316 stainless steel stock sheet boasts a nominal thickness of 0.330 inches, a length of 18 inches, and a width of 42 inches. Composed of austenitic stainless steel with molybdenum, it exhibits exceptional resistance to pitting and crevice corrosion, making it ideal for environments involving chlorides and other corrosive agents. This material's inherent lubricity and low coefficient of friction are critical for components in sliding contact or where reduced wear is paramount. Certified to applicable industry standards, ensuring consistent material properties for reliable performance in critical industrial systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Align sheet with mounting or fabrication requirements. 3. Secure using appropriate fastening methods for the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect grade of stainless steel for corrosive environments. | Always specify 316 stainless steel for applications involving chlorides or other aggressive media to ensure adequate corrosion resistance. |
| Improper surface preparation leading to poor adhesion or premature wear. | Thoroughly clean all mating surfaces before installation to remove contaminants and ensure optimal performance. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Bearings and bushings in corrosive environments, Wear plates and guides for sliding mechanisms, Components in marine and chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||