This 0.228" thick 316 stainless steel stock sheet offers exceptional corrosion resistance and durability, making it ideal for high-performance lubricating applications where material integrity is paramount.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.228" |
| Length | 40" |
| Width | 17" |
Precision-manufactured to tight tolerances, this 316 stainless steel stock sheet measures 0.228 inches in thickness, 40 inches in length, and 17 inches in width. Composed of austenitic stainless steel with molybdenum, it exhibits superior resistance to pitting and crevice corrosion, particularly in chloride-rich environments, compared to 304 grade. Its excellent formability and weldability facilitate integration into complex systems. The inherent lubricity of the polished surface, coupled with the material's robust mechanical properties, ensures extended service life in dynamic lubricating environments, minimizing wear and friction.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet thoroughly to remove any surface contaminants or protective coatings. 2. Fabricate the sheet according to design specifications, ensuring accurate cuts and bends. 3. Install the fabricated component in the intended lubricating system, verifying proper fit and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel in corrosive environments. | Always specify 316 stainless steel for applications exposed to chlorides or aggressive chemicals to prevent premature corrosion and failure. |
| Improper surface preparation leading to reduced performance. | Ensure the sheet's surface is clean and free of debris or oxidation before installation to maintain optimal lubricity and prevent contamination. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Components for high-pressure lubrication systems, Bearings and bushings in marine environments, Shafts and rollers in chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||