This 0.198-inch thick 316 stainless steel stock sheet provides exceptional corrosion resistance for critical pneumatic systems. Precisely cut to 16" x 38", it ensures reliable performance in harsh environments.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.198" |
| Length | 16" |
| Width | 38" |
Manufactured under strict quality controls, this 316 stainless steel stock sheet offers superior tensile strength and a high degree of passivation for excellent resistance to pitting and crevice corrosion, particularly in chloride-rich environments common in many industrial pneumatic applications. Its 0.198" thickness ensures robust structural integrity for manifold fabrication, custom enclosures, and component backing plates within demanding pneumatic systems operating at elevated pressures and temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material grade against project specifications. 2. Carefully cut to required shapes using appropriate metalworking tools. 3. Ensure all edges are deburred and cleaned prior to assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Always specify 316 stainless steel for applications exposed to saltwater, chemicals, or other corrosive agents. |
| Improper edge finishing leading to stress risers. | Thoroughly deburr and smooth all cut edges to prevent premature failure. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Pneumatic manifold fabrication, Custom control panel construction, Component backing and structural support in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||