This 316 stainless steel stock sheet is engineered for demanding pneumatic systems. Its superior corrosion resistance and robust form factor ensure reliable performance in harsh environments.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.080" |
| Length | 39" |
| Width | 13" |
Manufactured under strict quality controls, this 316 stainless steel stock sheet offers exceptional durability and resistance to a wide range of corrosive media, including chlorides and acids common in industrial pneumatics. The 0.080" thickness provides structural integrity for pressure containment and component support, while the 39" length and 13" width offer ample material for fabrication of custom manifolds, enclosures, and structural elements within pneumatic assemblies. Its low carbon content minimizes carbide precipitation during welding, maintaining its excellent intergranular corrosion resistance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate metal cutting tools. 2. Deburr all cut edges to remove sharp protrusions. 3. Fabricate or form sheet as per design specifications for pneumatic system components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for pneumatic components in corrosive environments. | Always select 316 stainless steel or equivalent corrosion-resistant alloys for components exposed to moisture, chemicals, or saltwater. |
| Improper edge finishing after cutting. | Thoroughly deburr all cut edges to prevent damage to seals, hoses, or injury during handling. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Pneumatic manifold fabrication, Enclosures for pneumatic control panels, Structural supports for pneumatic actuators and valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||