This 316 stainless steel stock sheet is engineered for demanding pneumatic applications. Its superior corrosion resistance and mechanical strength ensure reliable performance in harsh environments.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.387" |
| Length | 42" |
| Width | 29" |
Built to exacting engineering tolerances, this 316 stainless steel stock sheet measures 0.387 inches thick, 42 inches in length, and 29 inches in width. The inherent properties of 316 stainless steel, including its high chromium and molybdenum content, provide exceptional resistance to pitting and crevice corrosion in chloride-rich environments, making it ideal for pneumatic systems exposed to aggressive media, high humidity, or marine conditions. Its robust mechanical properties ensure structural integrity under pressure and thermal cycling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against system requirements. 2. Prepare cutting and forming equipment for 0.387" thick stainless steel. 3. Machine or fabricate to final component specifications, ensuring smooth edges to prevent pneumatic leaks.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material than specified, leading to structural failure under pressure. | Always adhere to the required material thickness for the operational pressures and environmental stresses of the pneumatic system. |
| Inadequate edge preparation, resulting in leaks or component damage. | Ensure all cut edges are deburred and smooth to maintain pneumatic seal integrity and prevent premature wear. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Corrosion-resistant pneumatic cylinders, High-pressure pneumatic tubing and fittings, Seals and diaphragms in aggressive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||