Engineered for robust pneumatic applications, this 316 stainless steel stock sheet offers superior corrosion resistance and mechanical integrity. Its precise dimensions ensure seamless integration into critical systems.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.858" |
| Length | 43" |
| Width | 25" |
Precision-manufactured to tight tolerances, this 0.858" thick 316 stainless steel sheet measures 43" in length and 25" in width. The inherent properties of 316 stainless steel, including its enhanced molybdenum content, provide exceptional resistance to pitting and crevice corrosion, making it ideal for harsh environments and corrosive media common in pneumatic actuation and control. Its high tensile strength and formability allow for complex component fabrication and long service life under demanding pressure cycles and temperature variations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and integrity prior to cutting. 2. Utilize appropriate cutting and forming equipment for 0.858" thick stainless steel. 3. Ensure all edges are deburred and cleaned thoroughly before integration into the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for pneumatic components in corrosive environments. | Always select 316 stainless steel for its superior corrosion resistance in demanding pneumatic applications. |
| Insufficient material thickness for the intended pneumatic pressure. | Consult pneumatic system design specifications to ensure the 0.858" thickness is adequate for operating pressures. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Pneumatic valve bodies, Cylinder components, Pneumatic manifold blocks, Corrosive environment pneumatic controls.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||