Engineered for exceptional performance in challenging environments, this 316 stainless steel stock sheet offers superior corrosion resistance and durability. Ideal for safety-critical applications requiring robust material integrity.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.178" |
| Length | 29" |
| Width | 21" |
Specified by design engineers worldwide, this 316 stainless steel stock sheet provides an optimal balance of mechanical strength and chemical inertness. With a thickness of 0.178 inches, a length of 29 inches, and a width of 21 inches, it meets rigorous industry standards. The austenitic 316 alloy, with its molybdenum content, offers enhanced resistance to pitting and crevice corrosion, particularly in chloride-rich environments. This makes it a preferred material for offshore, marine, and chemical processing applications where safety and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and fabrication tools are clean and free of contaminants. 2. Carefully measure and mark dimensions according to project specifications. 3. Fabricate using appropriate methods for 316 stainless steel, such as laser cutting, waterjet cutting, or shearing, maintaining surface integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools for cutting or fabrication, leading to contamination and potential corrosion initiation. | Utilize dedicated stainless steel tools and maintain strict cleanliness protocols during all fabrication stages. |
| Improper storage, exposing the sheet to moisture or corrosive substances before installation. | Store sheets in a dry, well-ventilated area, ideally on non-absorbent supports, and keep protective films intact until ready for use. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Marine hardware and components, Chemical processing equipment, Food and beverage processing surfaces, Offshore platforms and structures, Medical device fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||