This 0.553-inch thick 316 stainless steel sheet provides exceptional durability and corrosion resistance. Its robust construction makes it ideal for critical safety applications where material integrity is paramount.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.553" |
| Length | 32" |
| Width | 26" |
Trusted by engineers across multiple sectors, this 316 stainless steel stock sheet is manufactured to exacting standards. Measuring 0.553 inches in thickness, 32 inches in length, and 26 inches in width, it offers substantial material for fabrication. The inherent properties of 316 stainless steel, including its superior resistance to pitting and crevice corrosion due to molybdenum content, make it the material of choice for environments exposed to chlorides, acids, and high temperatures. This alloy's excellent weldability and formability further enhance its utility in custom engineering solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and forming tools are calibrated and appropriate for 0.553" thick 316 stainless steel. 2. Clean surfaces thoroughly to remove any contaminants that could compromise corrosion resistance. 3. Fabricate and install according to project-specific engineering drawings and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools which can embed iron particles, leading to rust. | Utilize dedicated stainless steel cutting and forming tools, or thoroughly clean tools between uses if shared. |
| Inadequate surface preparation leading to premature corrosion. | Always degrease and passivate the surface after fabrication and before exposure to corrosive environments. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Chemical Processing Equipment, Marine and Offshore Structures, Food and Beverage Industry Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||