Engineered from premium 316 stainless steel, this stock sheet offers exceptional corrosion resistance and low friction. Its robust construction and specific material grade make it ideal for demanding lubricating applications where wear and chemical exposure are concerns.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.580" |
| Length | 37" |
| Width | 12" |
Precision-manufactured to tight tolerances, this 316 stainless steel stock sheet measures 0.580 inches thick, 37 inches in length, and 12 inches in width. The inherent properties of 316 stainless steel, including its enhanced molybdenum content, provide superior resistance to pitting and crevice corrosion in aggressive environments, commonly encountered in lubricating systems. This material also exhibits excellent formability and weldability, allowing for custom fabrication. Its non-galling characteristics minimize friction and wear, making it the material of choice for components within bearing assemblies, sliding mechanisms, and other areas requiring smooth, low-resistance operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area is clean and free of contaminants. 2. Carefully position the sheet for the intended application. 3. Secure the sheet using appropriate fastening methods, considering material compatibility.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower grade stainless steel for corrosive environments. | Always specify 316 stainless steel for applications exposed to chlorides, acids, or marine environments to prevent premature corrosion. |
| Improper handling leading to surface scratching. | Utilize non-abrasive handling techniques and protective coverings during fabrication and installation to maintain surface integrity. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Bearing surfaces, Low-friction components in fluid handling, Wear plates for sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||