Engineered for superior performance, this 316 stainless steel stock sheet offers exceptional corrosion resistance and durability for critical industrial safety installations and fabrication projects.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.773" |
| Length | 26" |
| Width | 35" |
Precision-manufactured to tight tolerances, this 0.773-inch thick sheet is fabricated from marine-grade 316 stainless steel, renowned for its elevated molybdenum content, providing enhanced resistance to pitting and crevice corrosion, particularly in chloride-rich environments. Its robust mechanical properties make it suitable for applications requiring high strength and longevity under demanding operational conditions. The precise dimensions of 26 inches by 35 inches ensure seamless integration into custom fabrications and structural components where reliability and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compliance with project specifications. 2. Prepare substrate and cutting tools for precise dimensioning. 3. Secure sheet for cutting, bending, or welding operations, following established safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel in corrosive environments. | Always select 316 stainless steel for applications exposed to salts, acids, or high moisture to prevent premature corrosion and failure. |
| Inadequate edge preparation before welding. | Thoroughly clean and bevel edges to the recommended angle for optimal weld penetration and structural integrity, especially with thicker gauges. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Industrial Machine Guarding, Corrosion-Resistant Structural Components, Chemical Processing Equipment Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||