Engineered from superior 316 stainless steel, this stock sheet offers exceptional corrosion resistance and durability. Ideal for fabrication and demanding environments where performance is paramount.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.031" |
| Length | 35" |
| Width | 20" |
Manufactured under strict quality controls, this 316 stainless steel stock sheet exhibits a precise thickness of 0.031 inches (0.79 mm), a substantial length of 35 inches (889 mm), and a width of 20 inches (508 mm). The 316 grade, renowned for its molybdenum content, provides enhanced resistance to pitting and crevice corrosion, particularly in chloride environments. This material's excellent weldability and formability make it suitable for a wide array of custom fabrications and structural components in marine, chemical processing, and food service industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure a clean and appropriate cutting surface. 2. Utilize suitable cutting tools for stainless steel, such as abrasive saws or plasma cutters. 3. Deburr all cut edges to prevent injury and ensure smooth finishing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools for cutting or shaping. | Employ dedicated stainless steel cutting and shaping tools to prevent contamination and maintain material integrity. |
| Inadequate edge finishing after cutting. | Always deburr and smooth cut edges thoroughly to eliminate sharp points and ensure safe handling and further processing. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom fabrication of marine components, Chemical processing equipment lining, Food service industry fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||