Precision-engineered 316 stainless steel stock sheet, offering superior corrosion resistance and mechanical strength for critical industrial and fabrication needs.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.656" |
| Length | 39" |
| Width | 36" |
Manufactured under strict quality controls, this 316 stainless steel stock sheet boasts a nominal thickness of 0.656 inches, a length of 39 inches, and a width of 36 inches. Composed of austenitic chromium-nickel stainless steel with molybdenum, it exhibits exceptional resistance to pitting and crevice corrosion in chloride-containing environments, as well as enhanced resistance to general corrosion compared to standard chromium-nickel alloys. Its high tensile strength and formability make it suitable for a wide array of fabrication and structural components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of contaminants. 2. Verify sheet dimensions and material grade against project specifications. 3. Proceed with fabrication processes such as cutting, bending, or welding according to standard industrial practices for 316 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade stainless steel for corrosive environments. | Always specify and verify 316 stainless steel for applications involving saline solutions, chemicals, or marine exposure. |
| Improper handling leading to surface contamination. | Wear clean gloves and use non-abrasive tools during handling and fabrication to maintain surface integrity and prevent galvanic corrosion. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Chemical processing equipment fabrication, Marine hardware and structural components, Food and beverage processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||