This 316 stainless steel stock sheet offers superior corrosion resistance and durability, making it an exceptional material for rigorous abrading and polishing tasks across various industrial sectors.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.551" |
| Length | 14" |
| Width | 28" |
A proven choice for industrial professionals, this 316 stainless steel stock sheet boasts a thickness of 0.551 inches, a length of 14 inches, and a width of 28 inches. Manufactured from marine-grade 316 stainless steel, it exhibits excellent resistance to pitting, crevice corrosion, and general corrosion, particularly in chloride-rich environments. Its inherent strength and ability to withstand abrasive forces make it ideal for surface preparation, finishing, and fabrication in chemical processing, food and beverage production, and marine engineering.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of contaminants. 2. Cut the sheet to the required dimensions using appropriate cutting tools for stainless steel. 3. Deburr edges thoroughly to prevent injury and ensure proper fitment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools which can cause contamination and rust. | Utilize dedicated stainless steel cutting and handling tools to prevent cross-contamination. |
| Insufficient edge preparation leading to sharp or rough surfaces. | Always deburr and smooth all cut edges after fabrication. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Surface finishing and preparation, Component fabrication for corrosive environments, Abrasion-resistant liners and plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||